Concrete
Testing
Laboratory testing for concrete materials and samples used in construction works. Test scope is confirmed according to the project specification, sample type and required standard.
Request Concrete Testing
Concrete Testing
Quality construction begins with quality materials. ARCHITEST provides laboratory testing services to verify that construction materials meet project specifications, engineering standards and regulatory requirements.
Physical & Mechanical
- Density Test
- Water Absorption
- Water Permeability
- Water Penetration
- Initial Surface Absorption Test
- Compressive Strength
- Flexural Strength
- Tensile Splitting Strength
Durability
- Drying Shrinkage
- Carbonation Depth
- Coefficient Of Permeability Test
- Rapid Chloride Permeability
Chemical
- Chloride Content
- Sulphate Content
- Calcium Oxide Content (Cement Content)
- Mix Composition
Non-Destructive Test
- Surface Hardness by Rebound Hammer
- Windsor Probe Test
- Ultrasonic Pulse Velocity (UPV)
- Half-cell Potentials of Uncoated Reinforcing Steel In Concrete
Others
- Petrographic Examination
- Concrete Coring
- Pull Off Test for Determination of Bond Strength
What this
covers.
Concrete testing is usually required for quality control, material acceptance or project submission. The exact test set should always be confirmed against the project specification and applicable standard.
Sample Acceptance
Supports project teams in confirming whether submitted concrete samples are suitable for the requested testing scope.
Specification Review
The required method is confirmed based on concrete grade, sample type, age and submission requirement.
Report Support
Results are prepared for project records, consultant review, material approval or QA/QC documentation.
Scope confirmed
by specification.
From sample
to report.
For concrete QA/QC or submission use, provide the grade, sample type, casting date and project specification. Architest will confirm the applicable method and reporting format.
Send EnquiryProject specification, material type and intended use determine the correct test set.
Samples are logged, prepared and assigned to calibrated equipment under controlled workflow.
Results are reviewed, signed and issued for project records, submissions or acceptance checks.